Turbine Flow Meter
STANDARD’S Flow Meters address a broad scope of applications ranging from inert solutions to aggressive chemicals. These meters utilize a proven paddle wheel design and are available in a variety of sizes and materials. Meters are available in three configurations: kits for Drum Pumps, Barb Connections, or Permanent installation.
Applications
- Pump Monitoring
- Gravity Feed Applications From Tanks
- Continuous Flow Measurement
- Adding Chemistry to Plating Tanks
- Chemical Packaging
- Blending Agricultural Products
- Adding Colors and Fragrances
Features
- Oval Gear Design
- Measures: Gallons, Liters, Cubic Meters
- Re-settable Totalizer
- User Friendly “In Field” Calibration
- 7 Pre-Set Batches
- Remote Start Capabilities
- Relay Output Signal
Technical Data
| Available Sizes: | Polypropylene & PVDF 0.5" (13 mm) – 1.5" (38 mm) SS316 0.75" (19 mm) – 1.25" (32 mm) |
|
| Accuracy: | +/- 0.61% of Full Scale +/- 1% of Reading |
|
| Available Materials: | Polypropylene, PVDF or SS316 | |
| Maximum Viscosity: | 300 cps (mPas) | |
| Units of Measure: | Gallons, Liters, Cubic Meters | |
| Temperature Range: | Polypropylene -4º–176º F (-20º–80º C) Stainless & PVDF -22º–212º F (-30º–100º C) |
|
| Metering Principle: | Turbine (Paddle Wheel) | |
| Max. Operating Pressure: | 150 psi (10,5 bar) @ 70º F (20º C) | |
| Flow Range: | 0.5" (13 mm): 0.42 GPM (1,6 LPM) - 22.4 GPM (84,8 LPM) | |
| 0.75" (19 mm): 0.75 GPM (2,8 LPM) -39.8 GPM (150,7 LPM) | ||
| 1" (25 mm):1.17 GPM (4,4 LPM) - 62.2 GPM (235,4 LPM) | ||
| 1.25" (32 mm): 1.91 GPM (7,2 LPM) - 102 GPM (386,1 LPM) | ||
1.5" (38 mm): 2.99 GPM (11,3 LPM) - 159.3 GPM (603 LPM) |
||
Model Numbers
| Package P/N | Wetted Materials | Intake / Discharge Barb | Power |
| Polypropylene | |||
| F200-TEB005VT | Polypropylene | 0.5" (13 mm) FNPT | 3.6V/DC |
| F200-TEB007VT | Polypropylene | 0.75" (19 mm) FNPT | 3.6V/DC |
| F200-TEB010VT | Polypropylene | 1" (25 mm) FNPT | 3.6V/DC |
| F200-TEB012VT | Polypropylene | 1.25" (32 mm) FNPT | 3.6V/DC |
| F200-TEB015VT | Polypropylene | 1.5" (38 mm) FNPT | 3.6V/DC |
| PVDF | |||
| F200-TEK005VT | PVDF | 0.5" (13 mm) FNPT | 3.6V/DC |
| F200-TEK007VT | PVDF | 0.75" (19 mm) FNPT | 3.6V/DC |
| F200-TEK010VT | PVDF | 1" (25 mm) FNPT | 3.6V/DC |
| F200-TEK012VT | PVDF | 1.25" (32 mm) FNPT | 3.6V/DC |
| F200-TEK015VT | PVDF | 1.5" (38 mm) FNPT | 3.6V/DC |
| PVDF | |||
| F200-TEK007VT | SS316 | 0.75" (19 mm) FNPT | 3.6V/DC |
| F200-TEK010VT | SS316 | 1" (25 mm) FNPT | 3.6V/DC |
| F200-TEK012VT | SS316 | 1.25" (32 mm) FNPT | 3.6V/DC |
Dimensions
